SPOILER ALERT!
Flow Wrapper Troubleshooting
https://www.tefude.com/food-packaging-equipment/
Flow package is now a very well known and common packaging method, and an increasing number of clients are buying flow wrap machine out of us.
However, because some clients' operation techniques are wrong, causing the system to malfunction, we will list some frequent flow wrapper troubleshooting here.
Inch. The back seal wrinkle is caused by the mismatch between the rate of the middle seal wheel and also the packing speed of the system. There's just a black rotating handle between the two centre seal wheels. It is used to correct the speed of their centre seal wheel. Adjust the speed to the left. Slow, turn right to rate up.
2. In case the rotation handle has no effect, the belt could fall because of a lot of revolutions. Open the case cover, there's actually a belt at the connection with the grip, check whether the belt has been lost, and then revive it.
Flow Wrap Machine
1. Item cutting could possibly result from incorrect material degree alteration, simply correct the material level handle.
2. There might also be issues with the item itself, such as different shapes and lengths.
3. The speed is too fast. The speed is too fast, and the end seal speed have not kept up. That means you can decrease the packing rate or boost your end-sealing rate.
1. Click Clear. After emptying, closed down and restart.
2. In the preceding steps still don't work, assess the ending seal encoder at the lower instance, the engine has a belt on it, and find out whether it is loose. When it's loose, this error alarm problem usually does occur.
If you have other flow wrapper problem, please get in touch with us at no cost.
Flow package is now a very well known and common packaging method, and an increasing number of clients are buying flow wrap machine out of us.
However, because some clients' operation techniques are wrong, causing the system to malfunction, we will list some frequent flow wrapper troubleshooting here.
Back guarantee folds:
Inch. The back seal wrinkle is caused by the mismatch between the rate of the middle seal wheel and also the packing speed of the system. There's just a black rotating handle between the two centre seal wheels. It is used to correct the speed of their centre seal wheel. Adjust the speed to the left. Slow, turn right to rate up.
2. In case the rotation handle has no effect, the belt could fall because of a lot of revolutions. Open the case cover, there's actually a belt at the connection with the grip, check whether the belt has been lost, and then revive it.
Flow Wrap Machine
Cut merchandise:
1. Item cutting could possibly result from incorrect material degree alteration, simply correct the material level handle.
2. There might also be issues with the item itself, such as different shapes and lengths.
3. The speed is too fast. The speed is too fast, and the end seal speed have not kept up. That means you can decrease the packing rate or boost your end-sealing rate.
End seal encoder failure:
1. Click Clear. After emptying, closed down and restart.
2. In the preceding steps still don't work, assess the ending seal encoder at the lower instance, the engine has a belt on it, and find out whether it is loose. When it's loose, this error alarm problem usually does occur.
If you have other flow wrapper problem, please get in touch with us at no cost.
